TL;DR
Your first year engineering classes come from your university’s current FE syllabus, not a generic online list. In Maharashtra, first check your university, pattern, semester, and subject titles. Then choose extra help only if you miss two or more readiness checks in Engineering Mechanics or Engineering Physics. RG Lectures lists university-specific courses for both subjects.
Start with your university’s FE syllabus: it names the first year engineering classes you must take. For example, the Mumbai University FE curriculum includes mathematics, physics, chemistry, mechanics, electrical engineering, practicals, and workshop work.
Your university, admission-year pattern, and semester decide the final list. Use this table to decide whether you need extra help in Engineering Mechanics, Engineering Physics, both, or neither.
Choose Mechanics, Physics, Both, or Neither
Give yourself one point for every skill you can complete alone. Our rule of thumb: if you miss 2 or more checks in one subject, targeted help is likely worth your study time.
| Your Official Subject | Readiness Checks | Choose | Next Action |
|---|---|---|---|
| Neither appears this semester | You only have a generic online list | Neither | Get your official syllabus |
| Engineering Mechanics | Diagram, forces, equilibrium, numericals | Mechanics | Match your university course |
| Engineering Physics | Concept, formula, units, numericals | Physics | Match your university course |
| Both subjects appear | Miss 2+ checks in both | Both | Compare the two-subject combo |
| Both subjects appear | Pass 3+ checks in each | Neither today | Revise weekly and reassess |
For Mechanics, test whether you can draw a free-body diagram, resolve a force into components, select the correct equilibrium equation, and complete a numerical without copying the method.
For Physics, test whether you can name the governing concept, choose the correct formula, keep units consistent, and complete a college-level numerical from start to finish.
What Classes Are in First Year Engineering?
First-year engineering usually builds the science and practical base for later branch subjects. It is not a list you pick from because another college teaches it.
Under Mumbai University’s published Rev. 2019 C Scheme, Semester I includes:
- Engineering Mathematics-I
- Engineering Physics-I
- Engineering Chemistry-I
- Engineering Mechanics
- Basic Electrical Engineering
- Physics, chemistry, mechanics, and electrical practicals
- Basic Workshop Practice-I
Semester II includes Engineering Mathematics-II, Engineering Physics-II, Engineering Chemistry-II, Engineering Graphics, C programming, and Professional Communication and Ethics-I. It also includes related practicals and workshop work. See the published subject structure for the full course and marks breakdown.
SPPU students should use their own current college document. SPPU’s official system identifies an F.E. 2024 Pattern, so an old 2019 timetable may not match your batch.
Write these four details at the top of your notebook before choosing any extra class:
- College and university
- Admission year and pattern
- Current semester
- Exact subject title and code
That small check prevents a Mumbai University course, an SPPU course, and an autonomous-college syllabus from being treated as interchangeable.
Which First-Year Subjects Need the Most Support?
A subject needs support when your problem-solving process breaks repeatedly, not because classmates bought a course.
Engineering Mechanics usually becomes urgent when you cannot turn a diagram into equations. The common sticking points are force resolution, moments, reactions, friction, equilibrium, and numericals.
Engineering Physics usually becomes urgent when you recognise a chapter but cannot start the numerical. The useful diagnostic is simple: can you name the concept, choose a formula, use correct units, and reach an answer you can explain?
Start with the one subject that fails more readiness checks. A single targeted course gives you more time for labs, journals, mathematics, and the other prescribed subjects.
Do You Need Engineering Mechanics Classes?
Choose Mechanics help when you miss at least 2 of the four Mechanics checks in the table. Do not wait for every chapter to feel difficult.
At RG Lectures, our current Engineering Mechanics, Mumbai University (2026-27) course is listed at ₹1,699. The course page lists notes, video lessons, and doubt support.
Our Pune University store also lists an Engineering Mechanics course labelled for Pune University (2026-27) at ₹1,699.
Use Mechanics support well:
- Watch one lesson section.
- Redraw every force diagram yourself.
- Solve 3 fresh problems without the video.
- Mark the exact step where you stop.
- Use doubt support for that step, not for a copied full answer.
That sequence turns a lecture into problem-solving practice.
Do You Need First Year Engineering Physics Classes?
Choose Physics help when you can recall theory but cannot set up or finish numericals. Physics improves fastest when you connect the concept, equation, unit, and calculation in that order.
Our current Engineering Physics, Mumbai University (2026-27) course is listed at ₹1,299. Its course page describes clear video lessons and practice material.
The Pune University category also lists Engineering Physics (2026-27) at ₹1,299. If you need help in both subjects, the current two-subject combo is ₹2,429. Separate purchases total ₹2,998, so the combo is ₹569 lower at the listed price. See the live course store before paying because course offers can change.
Use the same short cycle every week:
- Learn one concept.
- Make a four-line formula note.
- Solve 5 untimed questions.
- Rework only the questions you missed the next day.
- Add one lab or viva question from your college notes.
If you are unsure whether your difficulty is concepts, numericals, or revision, use our Physics support diagnostic before choosing a format.
How to Choose Online First Year Engineering Classes
Choose the course that matches your subject title and university first. A cheaper course with the wrong pattern costs more when you still need to relearn the topic before your exam.
Use this order:
- Open your official FE syllabus.
- Find the exact subject title for this semester.
- Choose the matching university-labelled course.
- Check the course page for the learning format you need.
- Compare one-subject and two-subject prices only after both subjects match.
- Keep your college lab manual, assignments, and timetable as the main schedule.
RG Lectures currently lists separate Mumbai University and Pune University courses for Engineering Mechanics and Engineering Physics. Our MU and Pune categories also list Engineering Graphics and subject combos, so choose by your actual timetable rather than buying a broad bundle by default.
If you learn best from recorded explanations, our official YouTube and app guide shows where to find our official channels and paid batches.
What to Check Before Enrolling in a Class
Before you enrol, answer these questions in writing:
- Does the course name match my university and semester?
- Does my official syllabus include this subject now?
- Is my weakness concepts, numericals, or doubt resolution?
- Do I need one subject or two?
- Have I kept time for labs, journals, and college assignments?
- Does the current store price fit my budget?
Extra support should make your prescribed FE work easier. It does not replace college attendance, practical submissions, or lab preparation.
At RG Lectures, we suit Mumbai University and Pune University students who need focused help in Engineering Mechanics or Engineering Physics. Browse our first-year engineering courses after matching the course title to your official syllabus.
FAQs
Are First Year Engineering Subjects the Same for Every Branch?
Many Maharashtra colleges teach a common FE foundation across branches. The exact subject names, semester placement, practical work, and assessment pattern still come from your university or autonomous college. Use your own syllabus as the final list.
Can an Online Class Replace College Labs or Attendance?
No. Online teaching can help you understand theory and numericals, but your college controls practical attendance, journals, viva work, and internal assessment. Keep your college timetable as the main schedule.
What Is a Free-Body Diagram?
A free-body diagram is a sketch of one object with every external force shown on it. In Engineering Mechanics, it helps you choose equations for equilibrium, reactions, and force components. If drawing one is difficult, start with Mechanics support before moving to harder numericals.
What Should I Ask Before Buying a Course?
Ask whether the course matches your university, current pattern, semester, and exact subject title. Then ask whether its teaching format addresses your problem, such as concepts, numericals, notes, or doubts. Those details matter more than a course label that only says “FE.”
Should I Buy Both Physics and Mechanics Together?
Buy both only when both readiness checklists show a real gap. If Physics is strong but Mechanics is weak, choose Mechanics alone and protect time for your other FE subjects.
